MD3000i Degraded Physical Disk Channel
Our MD3000i had errors saying one of the hard drives and control modules were bad. I replaced the hard drive and control module and it appears as though the hard drive rebuilt successfully because the...
View ArticleDoes the PV MD38xx work with the MD14xx expansion enclosure?
Simply the title. I see that the manual for the MD38xx only shows the MD12xx series as a valid expansion, and I can't find anything official saying that it will work. Just a yes or no from someone in...
View ArticleMD3000 Rebooting over and over.
I built this up and expanded it over the past two years without problems but this week I added two new drives. Same as ones I have added before. The manager showed them as available. Then suddenly the...
View ArticleTL2000\TL4000 Drive Upgrade
HiI'm Have TL2000 Library with LTO6 DriveI purchase a new LTO7 Drive and replace the Drive in the Library (Using the Same sled)Update Library Firmare (E.30) and the Drive Firmware (G9Q1)refresh...
View ArticlePowerVault 124T ERROR TA[31]-HardwareB
Good morning, it was programmed the disconnection of the equipment for maintenance in the electric network, after turning it on, the tape backup server log is presenting this error below: **** Tape...
View ArticleConfigure Alert on MD3220i
Hi there, I'm really in on pressure to configure Alert on MD3220i, please help me so I'm in rush. what I did so far:I setup virtual mail server (include gmail account, it works fine I can send out test...
View ArticleTL2000 Invalid Drive Error
Just installed a half height LTO4 drive into my tl2000, but I am getting "Exception 48 1". Is the TL 2000 only compatible with IBM LTO 4 drives? The one in there is an HP model SAS. Is it possible to...
View ArticleMD3220i Configure Alert
Hi all, I'm going to configure alert on MD3220i, can I put as follow:Mail server: smtp.gmail.comEmail sender: my gmail email accountthanks
View ArticleTL1000 and Backup Exec 16
Hi Guys,Seeking your expertise in your best practice in setting up TL1000 with a server using backup exec 16. Thank you.
View ArticleDell PowerVault 114T Connection with Dell Server
Hello all. In my new job i found an Dell PowerVault 114T with an dell server 2950 both turned of and disconnected.I need to connect and test but I'm not an expert. All I have is like the picture...
View ArticlePERC 9 and 'disk cache policy'
PERC 9 has a virtual disk setting for "disk cache policy". The help in OpenManage says it's disabled by default for SAS but with the latest OpenManage I find it's enabled.Previous posts have described...
View ArticleMD 3200i - lockdown mode
Good day,I've purchased a used MD 3200i.When it boots, it enters some lock down mode and I’m not able to do anything.I’d like to clear the config and start fresh.I’ve googled and tried all sorts of...
View Articleiscsi-to-sas bridge connectivity problem
Hi,I have TL2000 with installed iscsi to sas bridge, windows server 2008 , managed switch.The tl2000 bridge ethernet port is connected to switch with 1G speed, and the MTU size is 9000.The windows...
View ArticleDR4100 - Insufficient disk space. Filesystem switched to read-only mode.
We ran out of space on a DR4100 and have deleted at least 20TB of data. Cleaner has been running for 2 weeks but we are not seeing any change from the available capacity of 0%. How do we address this...
View ArticleML6000 reset login
Hi, I have just bought an ML6000 which happened to be part of bulk buy of (used) servers.. I am unable to login to the ML6000. The default admin/password have obviously been changed. How do I solve...
View Articleraid controller 0,1 partially down type is out of band
please help with this error. all my disks are ok, i only get an option to initialise. this is raid 5
View ArticleLabels for LTO 5 tapes
Hi,We would like to buy only some labels. for our LTO 5 Tapes, last time Sam has send us sku number for 61-120 and it was SKU#330-9142.Now we want to buy labels from 121-181 what is the SKU number for...
View ArticleR720 with H710p mini and LSI 9300-8e won't detect MD1400?
We have an R720 with an H710p mini running Windows Server 2016. We added an LSI 9300-8e with the hopes of connecting an MD1400 to it. I know that the 9300-8e & MD1400 are rated 12Gbps and that we...
View ArticlePowerVault 124T Username/Password
Hi, I have a PowerVault 124T autoloader and I cannot log into through the web console because an old IT engineer set it up.When I try to log in, the "#" is ** 60737 **.Can anyone help me?
View ArticleMD3200 SAS SAN - Thin Virtual Disk Expansion
I've had to pick up a problem with a MD3200 unit connected to two R620 PEs running ESXi/ vSphere via SAS HBAs.There is a single disk pool configured with two Virtual Disks, with virtual capacities of...
View Article