Good morning, it was programmed the disconnection of the equipment for maintenance in the electric network, after turning it on, the tape backup server log is presenting this error below:
**** Tape Alert Queue **** Block 0, 017/017 entries @ 26 bytes each, wrap @ 000, erase @ 001 0000: PC: 00043 POH: 01872:10:40 Label:[] Flags:0020000000000000 0001: PC: 00043 POH: 02593:37:46 Label:[000007L3] Flags:3000000002000200 0002: PC: 00043 POH: 02635:10:38 Label:[] Flags:0020000002000000 0003: PC: 00043 POH: 03743:45:34 Label:[000016L3] Flags:0000080002000000 0004: PC: 00043 POH: 03769:21:38 Label:[] Flags:0020000002000000 0005: PC: 00043 POH: 04444:28:10 Label:[000015L3] Flags:0000080002000000 0006: PC: 00043 POH: 04446:33:30 Label:[] Flags:0020000002000000 0007: PC: 00043 POH: 05209:40:16 Label:[000011L3] Flags:0000080002000000 0008: PC: 00043 POH: 05210:22:41 Label:[] Flags:0020000002000000 0009: PC: 00043 POH: 05858:48:06 Label:[000008L3] Flags:0000080002000000 0010: PC: 00043 POH: 05859:11:05 Label:[] Flags:0020000002000000 0011: PC: 00043 POH: 06293:58:51 Label:[000015L3] Flags:0000080002000000 0012: PC: 00043 POH: 06296:02:47 Label:[] Flags:0020000002000000 0013: PC: 00043 POH: 06797:16:27 Label:[000010L3] Flags:0000080002000000 0014: PC: 00043 POH: 06799:20:28 Label:[] Flags:0020000002000000 0015: PC: 00043 POH: 07311:06:05 Label:[000015L3] Flags:0000080002000000 0016: PC: 00043 POH: 07313:09:52 Label:[] Flags:0020000002000000 **** Tape Alert Flags currently set on the Drive **** "HardwareB" (31) set Description = Hardware fault not related to a read/write operation Class = Media Serverity = Unknown Action = Unknown **** Tape Alerts associated with Cartridges located in the library ****
POC:00057 POH:00003:02:18SystemAutoloader:PV-124T
S/N:xxxxxxxx
Cust S/N: xxxxxxxDrive:LTO3-060-0
S/N:xxxxxxService Tag:<Service Tag removed> AutoloaderStatus:IdleVersion:V90.0 (005A.0h)Left Magazine:PresentRight Magazine:Not PresentBarcode Scanner:EnabledDriveStatus:Idle
EmptyTape Alerts:Flags[1-64]:0000000200000000
TA[31]-HardwareB
Version:93GNSAS Hashed Addr:0x014304
Administration LockHost:NoneExpiration:None (No Locking)Host Backup Software LockAutoloader:Not LockedDrive:Not LockedOperator Control PanelLCD:Drive TAflag[31]
HardwareB
a link to the documentation for this equipment. On page 63 there is a recommended action for this error. I believe that with this, the equipment returns to normal operation.http://downloads.dell.com/manuals/all-products/esuprt_ser_stor_net/esuprt_powervault/powervault-124t... - Dell PowerVault 124T LTO3-060 (SAS) Autoloader User's Guide
the procedure has been performed as in the document and the error log still remains and my Backup Exec software does not communicate with PowerVault. already got that error? Thank you very much in advance!