Dell R710 and powervault md1000...questions..
Hello, I take the opportunity to introduce myself ... my name is Pablo and I'm from Spain ... I currently have an R710 with H700 and I'm short hehe, I would like to buy a powervault md1000, but to...
View ArticleDELL PE R710 with PERC H800 connecting to MD1200 storage
Good Morning. We've got a PE R710 server connecting to a MD1200 storage array using a PERC H800 controller. Recently replaced a faulty EMM module in the storage. All the lights are green on the...
View ArticlePowervault MD12XX Split Mode No Drives Showing on EMM1
Hi,I have two Dell R720s with the 6Gbps SAS HBA's both connected to a Powervault MD1200 and MD1220 both with dual EMMs and both configured in split mode. The drives are also split half on bays 0-4/6-10...
View ArticleCannot upgrade the Firmware HDD Bypassed
We've got the MD3200 with 1,8TB Disks. slot 3 Disk has failed and then right away another one, that was configured as SPARE in slot 2. All Disks are in one disks' group and configured as RAID6. I've...
View ArticleTL2000 Bad Power Supply?
I'm having issues (not booting, various errors when it does), and I'm suspecting a bad power supply (still kinda working, but putting out lower voltages). Let's start at the beginning and keep this...
View ArticleNX3610 FluidFS Service Pack Install
I'm trying update a NX3610 to DellFluidFS-2.0.7680-SP in order to get to DellFluidFS-3.0.940120-SP-NX but I'm getting the following error:Service pack validation failed: Service Pack installation...
View ArticleMD3620f - Thermal Sensor failing
Hello Dell and Forum users.We are experiencing this error:Component reporting problem: Thermal sensor Status: UNKNOWNLocation: RAID Enclosure 0 Enclosure 0, Sensor 2Component requiring...
View Articledell powervault nx3100
Hi,I am using dell powervault nx3100 nas. now i found disk 01 failed at raid 1. In my system there are 2 raids , 1 is raid 5 and another 1 is raid 1. Can someone help me explain how to change hdd step...
View ArticlePowerVault 124T Username/Password
Hello, I have a PV124T Dell tape library that I recently took over support and I got the IP address but no login information was transferred to me. I have tried the following admin passwords with...
View ArticleMD3620f, one controller not booting. Can't access or VXWORKS interface
HiI have 2 controllers, 1 works with access to both <CTRL><BRK> and VXWORKS interface, so my cable etc are known good.No data needs to be kept.The faulty controller boots to, then hangs,...
View ArticleDR4100 network setup
Just installed our new DR4100 and trying to get it connected to our Dell N3024F but my 10 Gb ports are in use. So I setup Eth3 for my connection but from the factory they setup Bond0 of Eth1 and...
View ArticleDR4100 network setup
Just installed our new DR4100 and trying to get it connected to our Dell N3024F but my 10 Gb ports are in use. So I setup Eth3 for my connection but from the factory they setup Bond0 of Eth1 and eth2....
View ArticleDell LTO5 WHXH1
Hi,I have received one of the above (not 100% if this is where i need to post this...) however i'm unsure of the IP address for this unit, is it possible to view this at all? or what are the defaults...
View ArticleIndividual Disk Degraded Path path on MD3000
The other day my MD3000 came up with this error as well as Degraded Physical Disk Channel. Looking at the event log the reason is it reached a certain threshold for errors. I looked and over about 30...
View ArticleNX3230 or 730XD thoughts
is an NX3230 just an 730XD with Storage Server 2016 Pre installed?Reason for asking is that im looking to replace an old Dell NAS and on the pricing i have received the NX is more expensive but does...
View ArticleMoving disks from MD1000 to another MD1000
Hi,If I physically move all disks from an MD1000 Enclosure to another identical MD1000 Enclosure (obviously keeping the same sequence), will my PERC 6/E controller recognize the virtual disks and...
View ArticleNX400 Powervault OS reinstall
Hello,Last week, I suffered a major casualty on my storage server that destroyed a hard drive and rendered the server useless, I received a new hard and media from DELL and I'm currently trying to...
View ArticleDell Storage NX3230: iSCSI MAC listed from 6 NIC cards
HiI know that each NIC card for Dell Storage NX3230 has 2 MAC addresses listed, one for the Ethernet and one for iSCSI. Currently our network switch has port security turned on and it will cause port...
View ArticleMD3200i Raid Battery
One of the raid batteries in our MD3200i has failed.I tried ordering a replacement through our Dell sales rep but they said replacements aren't available.Can anyone tell me where I can get one?
View ArticleError when configuring Managment IP´s MD3800i
Hello everyone,I am configuring an MD3800i storage, from my computer I connect to the administration port and through the Modular Disk Configuration Utility, with the default IPs 192.168.129.101 and...
View Article