Hello,
in our company we have an MD3000i. Contained disks were configured in RAID6 and were exposing 2 separate LUNs used by 3 servers machines through iSCSI.
After a power loss we were not able to see the logical volumes anymore.
Management ports were answering to ping but not reachable using the MDSM utility.
After a long search we found the original serial cable in its original box and managed to connect it using hyperterminal running on an old windows XP laptop (115200:8:N:1:N).
We found that on both controllers the starpup was failing due to a firwmare failure.
When we send a break signal we the system ask us to press an uppercase 'S' to enter service interface. Unfortunately after pressing 'S' we have no result.
We also tried to swap the two controllers master <-> slave but the result was the same.
Is there any way to upload the firmware on one controller using the serial cable or the management port in the described situation?
Can you please help us? Any contribute is for sure precious.
Best regards
Francesco
here follows a log trace of one of the controllers:
Current date: 01/19/17 time: 03:46:04
Send <BREAK> for Service Interface or baud rate change
01/19/17-12:59:48 (GMT) (tRAID): NOTE: Set Powerup State
01/19/17-12:59:48 (GMT) (tRAID): NOTE: SOD Sequence is Normal, 0
01/19/17-12:59:48 (GMT) (tRAID): NOTE: SOD: removed SAS host from index 0
01/19/17-12:59:48 (GMT) (tRAID): NOTE: In iscsiIOQLIscsiInitDq. iscsiIoFstrBas
e = 0x0
01/19/17-12:59:48 (GMT) (tRAID): NOTE: Turning on tray summary fault LED
01/19/17-12:59:50 (GMT) (tRAID): NOTE: SYMBOL: SYMbolAPI registered.
01/19/17-12:59:50 (GMT) (tRAID): NOTE: lost persistent dq data because buffer w
as modified or size changed.
01/19/17-12:59:54 (GMT) (tRAID): NOTE: Initiating Drive channel: ioc:0 bringup
01/19/17-12:59:56 (GMT) (tRAID): NOTE: IOC Firmware Version: 00-24-63-00
01/19/17-13:00:00 (GMT) (tNetCfgInit): NOTE: Network Ready
01/19/17-13:00:04 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:1 phy:0 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:00:04 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:1 phy:1 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:00:14 (GMT) (tRAID): NOTE: IonMgr: Drive Interface Enabled
01/19/17-13:00:14 (GMT) (tRAID): NOTE: SOD: Instantiation Phase Complete
01/19/17-13:00:14 (GMT) (tRAID): WARN: No attempt made to open Inter-Controller
Communication Channels
01/19/17-13:00:14 (GMT) (tRAID): NOTE: LockMgr Role is Master
01/19/17-13:00:14 (GMT) (tRAID): WARN: FBM:validateSubModel: Exception - Alt co
ntroller not ready
01/19/17-13:00:14 (GMT) (tSasDiscCom): NOTE: SAS Discovery complete task spawne
d
01/19/17-13:00:15 (GMT) (tRAID): NOTE: spmEarlyData: No data available
01/19/17-13:00:15 (GMT) (sasCheckExpanderSet): NOTE: Expander Firmware Version:
0116-e05c
01/19/17-13:00:15 (GMT) (sasCheckExpanderSet): NOTE: Expander SAS address: Hi =
x5a4badb4 Low = x1925ed10
01/19/17-13:00:20 (GMT) (tSasDiscCom): WARN: SAS: Initial Discovery Complete Ti
me: 30 seconds
01/19/17-13:00:20 (GMT) (tRAID): NOTE: WWN baseName 0008a4ba-db1925ed (valid==>
SigMatch)
01/19/17-13:00:20 (GMT) (tRAID): NOTE: IonMgr: Host Interface Enabled
01/19/17-13:00:20 (GMT) (tRAID): NOTE: SOD: Pre-Initialization Phase Complete
01/19/17-13:00:21 (GMT) (tRAID): WARN: BID: initialize(): Power latched!
01/19/17-13:00:31 (GMT) (tRAID): NOTE: ACS: Icon ping to alternate failed: -2,
resp: 0
01/19/17-13:00:31 (GMT) (tRAID): NOTE: ACS: autoCodeSync(): Process start. Comm
Mode: 0, Status: 0
01/19/17-13:00:31 (GMT) (tRAID): WARN: ACS: autoCodeSync(): Skipped since alt n
ot communicating.
01/19/17-13:00:31 (GMT) (tRAID): NOTE: SOD: Code Synchronization Initialization
Phase Complete
01/19/17-13:00:31 (GMT) (tRAID): NOTE: Caught IconSendInfeasibleException Error
in iop::requestAltIopDelay
01/19/17-13:00:31 (GMT) (tRAID): NOTE: CheckInMonitor: Check-in failed (IconSen
dInfeasibleException Error)
01/19/17-13:00:32 (GMT) (NvpsPersistentSyncM): NOTE: NVSRAM Persistent Storage
updated successfully
01/19/17-13:00:32 (GMT) (tRAID): NOTE: USM Mgr initialization complete with 0 r
ecords.
01/19/17-13:00:32 (GMT) (tRAID): WARN: Received IconSendInfeasibleException Err
or adding small edr records from alt controller
01/19/17-13:00:32 (GMT) (tRAID): WARN: spm: unable to exchange features, assumi
ng none
01/19/17-13:00:32 (GMT) (tRAID): NOTE: SPM acquireObjects exception: IconSendIn
feasibleException Error
01/19/17-13:00:32 (GMT) (tRAID): NOTE: DBRead 0.196 secs
01/19/17-13:00:33 (GMT) (tRAID): NOTE: sas: Peering Disabled (Alt Unavailable)
01/19/17-13:00:33 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 0058c2e0 4c0c8 bytes , result 0
01/19/17-13:01:01 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:01:01 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:01:01 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:01:01 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:01:01 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:01:01 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:01:01 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:01:01 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:01:03 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 0058c2e0 4c0c8 bytes , result 0
01/19/17-13:01:30 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:01:30 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:01:31 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:0 Qlogic coredump file write failed.fclose returned -1
01/19/17-13:01:31 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:01:31 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:01:31 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:01:31 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:01:32 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 0058c2e0 4c0c8 bytes , result 0
01/19/17-13:01:59 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:01:59 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:02:00 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:02:00 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:02:00 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:02:00 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:02:00 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:02:00 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:02:01 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 0058c2e0 4c0c8 bytes , result 0
01/19/17-13:02:28 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:02:28 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:02:29 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:02:29 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:02:29 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:02:29 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:02:29 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:02:29 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:02:30 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 0058c2e0 4c0c8 bytes , result 0
01/19/17-13:02:39 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:0 phy:2 prevNumAc
tivePhys:0 numActivePhys:1
01/19/17-13:02:39 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: IOCPort: chan:0, FAILE
D to DEGRADED
01/19/17-13:02:39 (GMT) (tSasEvtWkr): WARN: sasIocPhyUp: Initializing Channel 0
: Attached SAS Address: 5a4badb41a459a10
01/19/17-13:02:41 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:0 phy:3 prevNumAc
tivePhys:1 numActivePhys:2
01/19/17-13:02:41 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: IOCPort: chan:0, DEGRA
DED to OPTIMAL
01/19/17-13:02:58 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:02:58 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:02:58 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:02:58 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:02:58 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:02:58 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:02:58 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:02:58 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:02:59 (GMT) (tRAID): WARN: QLStartAdapter: ControllerErrorCount exc
eeds threshold.
01/19/17-13:02:59 (GMT) (tRAID): ERROR: QLInitializeDevice: QLStartAdapter faile
d
01/19/17-13:02:59 (GMT) (tRAID): ERROR: QLAddDevice: controller/device/chip init
ialization failed.
01/19/17-13:02:59 (GMT) (tRAID): ERROR: qlgEnableHostInterface: QLInitializeDevi
ce failed.
01/19/17-13:02:59 (GMT) (tRAID): NOTE: ****************************************
****************************************
01/19/17-13:03:00 (GMT) (tRAID): NOTE: QLogic Target Application, Version 2.0
1.08 6-13-2005 (W2K)
01/19/17-13:03:00 (GMT) (tRAID): NOTE: iSCSI Target Application
01/19/17-13:03:00 (GMT) (tRAID): NOTE: ***************************************
*****************************************
Exception: Data Abort
-=<###>=-
Attaching interface lo0... done
Adding 9767 symbols for standalone.
Error
01/19/17-13:03:13 (GMT) (tRootTask): NOTE: I2C transaction returned 0x0423fe00
WARNING: Restart by watchdog time out
Current date: 01/19/17 time: 03:49:46
Send <BREAK> for Service Interface or baud rate change
01/19/17-13:03:30 (GMT) (tRAID): NOTE: SOD Sequence is Normal, 0
01/19/17-13:03:30 (GMT) (tRAID): NOTE: SOD: removed SAS host from index 0
01/19/17-13:03:30 (GMT) (tRAID): NOTE: In iscsiIOQLIscsiInitDq. iscsiIoFstrBas
e = 0x0
01/19/17-13:03:30 (GMT) (tRAID): NOTE: Turning on tray summary fault LED
01/19/17-13:03:32 (GMT) (tRAID): NOTE: SYMBOL: SYMbolAPI registered.
01/19/17-13:03:35 (GMT) (tRAID): NOTE: Initiating Drive channel: ioc:0 bringup
01/19/17-13:03:38 (GMT) (tRAID): NOTE: IOC Firmware Version: 00-24-63-00
01/19/17-13:03:42 (GMT) (tNetCfgInit): NOTE: Network Ready
01/19/17-13:03:47 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:1 phy:0 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:03:47 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:1 phy:1 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:03:48 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:0 phy:2 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:03:48 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:0 phy:3 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:03:48 (GMT) (tSasCfg016): NOTE: Alt Controller path up - chan:1 phy
:18 itn:1
01/19/17-13:03:48 (GMT) (tSasCfg021): NOTE: Alt Controller path up - chan:0 phy
:16 itn:2
01/19/17-13:03:57 (GMT) (tRAID): NOTE: IonMgr: Drive Interface Enabled
01/19/17-13:03:58 (GMT) (tRAID): NOTE: SOD: Instantiation Phase Complete
01/19/17-13:03:58 (GMT) (tRAID): NOTE: Inter-Controller Communication Channels
Opened
01/19/17-13:03:58 (GMT) (tSasDiscCom): NOTE: SAS Discovery complete task spawne
d
01/19/17-13:03:58 (GMT) (IOSched): NOTE: New Initiator: 1 - channel: 0,devHand
le: x2b, SAS Address: 5a4badb41a459a00
01/19/17-13:03:58 (GMT) (IOSched): NOTE: New Initiator: 2 - channel: 1,devHand
le: x1a, SAS Address: 5a4badb41a459a01
01/19/17-13:03:58 (GMT) (tRAID): NOTE: LockMgr Role is Slave
01/19/17-13:03:58 (GMT) (sasCheckExpanderSet): NOTE: Expander Firmware Version:
0116-e05c
01/19/17-13:03:58 (GMT) (sasCheckExpanderSet): NOTE: Expander SAS address: Hi =
x5a4badb4 Low = x1925ed10
01/19/17-13:03:58 (GMT) (tRAID): NOTE: spmEarlyData: Using cached data
01/19/17-13:04:02 (GMT) (tSasDiscCom): WARN: SAS: Initial Discovery Complete Ti
me: 30 seconds
01/19/17-13:04:02 (GMT) (tRAID): NOTE: WWN baseName 0006a4ba-db1a459a (valid==>
BaseFromAlt)
01/19/17-13:04:02 (GMT) (tRAID): NOTE: ionEnableHostInterfaces is waiting for a
channel to become ready
01/19/17-13:04:03 (GMT) (tRAID): NOTE: ionEnableHostInterfaces waited 1800ms fo
r a channel to become ready
01/19/17-13:04:03 (GMT) (tRAID): NOTE: IonMgr: Host Interface Enabled
01/19/17-13:04:03 (GMT) (tRAID): NOTE: SOD: Pre-Initialization Phase Complete
01/19/17-13:04:16 (GMT) (iacTask1): NOTE: ACS: Acs Needed on Alt: No, StateCode
: 3, ReasonCode = 2
01/19/17-13:04:16 (GMT) (tRAID): NOTE: ACS: autoCodeSync(): Process start. Comm
Mode: 0, Status: 1
01/19/17-13:04:16 (GMT) (tRAID): NOTE: SOD: Code Synchronization Initialization
Phase Complete
01/19/17-13:04:18 (GMT) (tSasEvtWkr): NOTE: sasLinkDown: expDevHandle:x9 - Wide
Port: #1 - Alt Controller, chan:1 encl:0, subExp:255, OPTIMAL to DEGRADED
01/19/17-13:04:18 (GMT) (tSasEvtWkr): NOTE: sasLinkDown: expDevHandle:x9 - Wide
Port: #1 - Alt Controller, chan:1 encl:0, subExp:255, DEGRADED to FAILED
01/19/17-13:04:18 (GMT) (tSasEvtWkr): NOTE: sasLinkDown: expDevHandle:xa - Wide
Port: #0 - Alt Controller, chan:0 encl:0, subExp:255, OPTIMAL to DEGRADED
01/19/17-13:04:18 (GMT) (tSasEvtWkr): NOTE: sasLinkDown: expDevHandle:xa - Wide
Port: #0 - Alt Controller, chan:0 encl:0, subExp:255, DEGRADED to FAILED
01/19/17-13:04:18 (GMT) (IOSched): NOTE: Disconnect Initiator 2 - channel: 1,
devHandle: x1a, I/O: 0, SAS Address: 5a4badb41a459a01
01/19/17-13:04:18 (GMT) (IOSched): WARN: sasRemoveInitiator - No I/O's - send E
ventAck: event: 00000018, eventContext: 0002001a
01/19/17-13:04:18 (GMT) (sasTgtSendEventAck): WARN: sasTgtSendEventAckTask - Se
ndEventAck for host: 2
01/19/17-13:04:18 (GMT) (IOSched): NOTE: Disconnect Initiator 1 - channel: 0,
devHandle: x2b, I/O: 0, SAS Address: 5a4badb41a459a00
01/19/17-13:04:18 (GMT) (IOSched): WARN: sasRemoveInitiator - No I/O's - send E
ventAck: event: 00000018, eventContext: 0002002b
01/19/17-13:04:18 (GMT) (sasTgtSendEventAck): WARN: sasTgtSendEventAckTask - Se
ndEventAck for host: 1
01/19/17-13:04:20 (GMT) (tHckReset): NOTE: LockMgr Role is Master
01/19/17-13:04:26 (GMT) (tRAID): NOTE: Scsicon error status fe received.
01/19/17-13:04:26 (GMT) (tRAID): WARN: sendTaskLockMsg: Error or Infeasible mes
sage status=fffffffd
01/19/17-13:04:26 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:04:26 (GMT) (NvpsPersistentSyncM): NOTE: NVSRAM Persistent Storage
updated successfully
01/19/17-13:04:26 (GMT) (tRAID): NOTE: USM Mgr initialization complete with 0 r
ecords.
01/19/17-13:04:26 (GMT) (tRAID): WARN: Received IconSendInfeasibleException Err
or adding small edr records from alt controller
01/19/17-13:04:27 (GMT) (tRAID): WARN: spm: unable to exchange features, assumi
ng none
01/19/17-13:04:27 (GMT) (tRAID): NOTE: SPM acquireObjects exception: IconSendIn
feasibleException Error
01/19/17-13:04:27 (GMT) (tRAID): NOTE: DBRead 0.167 secs
01/19/17-13:04:27 (GMT) (tRAID): NOTE: sas: SOD Bad Check-in: IconSendInfeasibl
eException Error
01/19/17-13:04:28 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 03208a80 4c0c8 bytes , result 0
01/19/17-13:04:53 (GMT) (tSasEvtWkr): NOTE: sasLinkUp: expDevHandle:x9 - WidePo
rt: #1 - Alt Controller, chan:1 encl:0, subExp:255, FAILED to DEGRADED
01/19/17-13:04:53 (GMT) (tSasEvtWkr): NOTE: sasLinkUp: expDevHandle:x9 - WidePo
rt: #1 - Alt Controller, chan:1 encl:0, subExp:255, DEGRADED to OPTIMAL
01/19/17-13:04:53 (GMT) (tSasEvtWkr): NOTE: sasLinkUp: expDevHandle:xa - WidePo
rt: #0 - Alt Controller, chan:0 encl:0, subExp:255, FAILED to DEGRADED
01/19/17-13:04:53 (GMT) (tSasEvtWkr): NOTE: sasLinkUp: expDevHandle:xa - WidePo
rt: #0 - Alt Controller, chan:0 encl:0, subExp:255, DEGRADED to OPTIMAL
01/19/17-13:04:54 (GMT) (tSasCfg037): NOTE: Alt Controller path up - chan:1 phy
:18 itn:1
01/19/17-13:04:54 (GMT) (tSasCfg038): NOTE: Alt Controller path up - chan:0 phy
:16 itn:2
01/19/17-13:04:55 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:04:55 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:04:56 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:04:56 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:04:56 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:04:56 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:04:56 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:04:56 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:04:57 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 03208a80 4c0c8 bytes , result 0
01/19/17-13:05:08 (GMT) (IOSched): NOTE: Connect Initiator: 1 - channel: 0,dev
Handle: x2b, SAS Address: 5a4badb41a459a00
01/19/17-13:05:08 (GMT) (iconMgr4): WARN: sasNetworkManager::healthCheckEvent -
Unknown Event (-3)
01/19/17-13:05:08 (GMT) (IOSched): NOTE: Connect Initiator: 2 - channel: 1,dev
Handle: x1a, SAS Address: 5a4badb41a459a01
01/19/17-13:05:08 (GMT) (iconMgr4): NOTE: CheckInMonitor: Check-in failed (NoUn
marshalFuncException Error)
01/19/17-13:05:08 (GMT) (iacTask3): NOTE: fbm:altValidateSubModelID: Sub-Model
IDs Validated
01/19/17-13:05:24 (GMT) (iacTask1): NOTE: ACS: Acs Needed on Alt: No, StateCode
: 3, ReasonCode = 2
01/19/17-13:05:24 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:05:24 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:05:25 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:05:25 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:05:25 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:05:25 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:05:25 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:05:25 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:05:27 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 03208a80 4c0c8 bytes , result 0
01/19/17-13:05:54 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:05:54 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:05:55 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:05:55 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:05:55 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:05:55 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:05:55 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:05:55 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:05:56 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 03208a80 4c0c8 bytes , result 0
01/19/17-13:06:23 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:06:23 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:06:24 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:06:24 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:06:24 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:06:24 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:06:24 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:06:24 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:06:25 (GMT) (tRAID): NOTE: QLStartFw: Downloading Driver's FW image
03.00.01.47 from 03208a80 4c0c8 bytes , result 0
01/19/17-13:06:52 (GMT) (tRAID): WARN: QLMailboxCommand: Cmd = 0069, completion
timeout
01/19/17-13:06:52 (GMT) (tRAID): WARN: QLMailboxCommand: command completion tim
eout, cmd = 0x69
01/19/17-13:06:53 (GMT) (tRAID): NOTE: Qlogic coredump file written to '1WDYM4J
:/tmp/QLogic_Coredump_port_0_1WDYM4J',rc 204E50, expected 204E50
01/19/17-13:06:53 (GMT) (tRAID): WARN: Qlogic coredump file write failed.fclose
returned -1
01/19/17-13:06:53 (GMT) (tRAID): NOTE: QLProcessSystemError: Restart RISC
01/19/17-13:06:53 (GMT) (tRAID): ERROR: QLGetFwState: MBOX_CMD_GET_FW_STATE fail
ed. Stat f000
01/19/17-13:06:53 (GMT) (tRAID): NOTE: QLRebootTimer: Status after Get FW State
4543
01/19/17-13:06:53 (GMT) (tRAID): NOTE: QLRebootTimer: QLGetFwState failed
01/19/17-13:06:54 (GMT) (tRAID): WARN: QLStartAdapter: ControllerErrorCount exc
eeds threshold.
01/19/17-13:06:54 (GMT) (tRAID): ERROR: QLInitializeDevice: QLStartAdapter faile
d
01/19/17-13:06:54 (GMT) (tRAID): ERROR: QLAddDevice: controller/device/chip init
ialization failed.
01/19/17-13:06:54 (GMT) (tRAID): ERROR: qlgEnableHostInterface: QLInitializeDevi
ce failed.
01/19/17-13:06:54 (GMT) (tRAID): NOTE: ****************************************
****************************************
01/19/17-13:06:54 (GMT) (tRAID): NOTE: QLogic Target Application, Version 2.0
1.08 6-13-2005 (W2K)
01/19/17-13:06:54 (GMT) (tRAID): NOTE: iSCSI Target Application
01/19/17-13:06:54 (GMT) (tRAID): NOTE: ***************************************
*****************************************
Exception: Data Abort
cpsr: 60000013 pc: 0x0020eb94 semTake
-=<###>=-
Attaching interface lo0... done
Adding 9767 symbols for standalone.
Error
01/19/17-13:07:45 (GMT) (tRootTask): NOTE: I2C transaction returned 0x0423fe00
WARNING: Reset by alternate controller
Current date: 01/19/17 time: 03:54:18
Send <BREAK> for Service Interface or baud rate change
01/19/17-13:08:02 (GMT) (tRAID): NOTE: SOD Sequence is Normal, 0
01/19/17-13:08:02 (GMT) (tRAID): NOTE: SOD: removed SAS host from index 0
01/19/17-13:08:02 (GMT) (tRAID): NOTE: In iscsiIOQLIscsiInitDq. iscsiIoFstrBas
e = 0x0
01/19/17-13:08:02 (GMT) (tRAID): NOTE: Turning on tray summary fault LED
01/19/17-13:08:04 (GMT) (tRAID): NOTE: SYMBOL: SYMbolAPI registered.
01/19/17-13:08:07 (GMT) (tRAID): NOTE: Initiating Drive channel: ioc:0 bringup
01/19/17-13:08:10 (GMT) (tRAID): NOTE: IOC Firmware Version: 00-24-63-00
01/19/17-13:08:14 (GMT) (tNetCfgInit): NOTE: Network Ready
01/19/17-13:08:19 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:1 phy:0 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:08:19 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:1 phy:1 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:08:20 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:0 phy:2 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:08:20 (GMT) (tSasEvtWkr): NOTE: sasIocPhyUp: chan:0 phy:3 prevNumAc
tivePhys:2 numActivePhys:2
01/19/17-13:08:20 (GMT) (tSasCfg016): NOTE: Alt Controller path up - chan:1 phy
:18 itn:1
01/19/17-13:08:20 (GMT) (tSasCfg021): NOTE: Alt Controller path up - chan:0 phy
:16 itn:2
01/19/17-13:08:29 (GMT) (tRAID): NOTE: IonMgr: Drive Interface Enabled
01/19/17-13:08:30 (GMT) (tRAID): NOTE: SOD: Instantiation Phase Complete
01/19/17-13:08:30 (GMT) (tRAID): NOTE: Inter-Controller Communication Channels
Opened
01/19/17-13:08:30 (GMT) (tSasDiscCom): NOTE: SAS Discovery complete task spawne
d
01/19/17-13:08:30 (GMT) (sasCheckExpanderSet): NOTE: Expander Firmware Version:
0116-e05c
01/19/17-13:08:30 (GMT) (sasCheckExpanderSet): NOTE: Expander SAS address: Hi =
x5a4badb4 Low = x1925ed10
01/19/17-13:08:35 (GMT) (tSasDiscCom): WARN: SAS: Initial Discovery Complete Ti
me: 30 seconds
01/19/17-13:09:14 (GMT) (tRAID): NOTE: Scsicon error status fe received.
01/19/17-13:09:59 (GMT) (tRAID): NOTE: Scsicon error status fe received.
01/19/17-13:10:01 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:10:44 (GMT) (tRAID): NOTE: Scsicon error status fe received.
01/19/17-13:10:44 (GMT) (tRAID): NOTE: LockMgr Role is Master
01/19/17-13:10:47 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:11:29 (GMT) (tRAID): WARN: FBM:validateSubModel: Exception - Alt co
ntroller not ready
01/19/17-13:11:29 (GMT) (IonTask): NOTE: Scsicon error status fe received.
01/19/17-13:11:33 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:12:14 (GMT) (tRAID): NOTE: Scsicon error status fe received.
01/19/17-13:12:19 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:12:59 (GMT) (tRAID): NOTE: spmEarlyData: Using cached data
01/19/17-13:13:05 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:13:44 (GMT) (tRAID): NOTE: Scsicon error status fe received.
01/19/17-13:13:51 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:14:14 (GMT) (tRAID): NOTE: WWN baseName 0006a4ba-db1a459a (valid==>
SigMatch)
01/19/17-13:14:14 (GMT) (tRAID): NOTE: IonMgr: Host Interface Enabled
01/19/17-13:14:14 (GMT) (tRAID): NOTE: SOD: Pre-Initialization Phase Complete
01/19/17-13:14:37 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:15:23 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:16:09 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:16:55 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:17:41 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:18:27 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:19:13 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:19:59 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:20:45 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:21:05 (GMT) (ssmEvent): NOTE: Scsicon error status fe received.
01/19/17-13:21:31 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:21:50 (GMT) (ssmEvent): NOTE: Scsicon error status fe received.
01/19/17-13:22:17 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:23:03 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:23:49 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:24:35 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:25:21 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:26:07 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:26:53 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:27:19 (GMT) (ssmEvent): NOTE: Scsicon error status fe received.
01/19/17-13:27:39 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:28:04 (GMT) (ssmEvent): NOTE: Scsicon error status fe received.
01/19/17-13:28:25 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:29:11 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:29:57 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:30:43 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:31:29 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:32:15 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:33:01 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:33:32 (GMT) (ssmEvent): NOTE: Scsicon error status fe received.
01/19/17-13:33:47 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:34:17 (GMT) (ssmEvent): NOTE: Scsicon error status fe received.
01/19/17-13:34:33 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:35:19 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:36:05 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:36:51 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:37:37 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:38:23 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:39:09 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:39:45 (GMT) (ssmSpin): NOTE: Scsicon error status fe received.
01/19/17-13:39:55 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:40:30 (GMT) (ssmSpin): NOTE: Scsicon error status fe received.
01/19/17-13:40:41 (GMT) (IOSched): NOTE: eventDataAlloc calling flushEvents: si
ze: 12
01/19/17-13:40:41 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.
01/19/17-13:41:25 (GMT) (IOSched): NOTE: eventDataAlloc calling flushEvents: si
ze: 12
01/19/17-13:41:27 (GMT) (HealthCheck): NOTE: Scsicon error status fe received.