From the Powervault Modular Disk Storage Manager, I go to Setup->Configure Ethernet Management Ports and select Module 0, Port 1 and/or Module 1, Port 1 and click "Change RAID Controller Module Gateway," then set the gateway address. It comes back with:
Error 4 - The operation cannot complete because of an incorrect parameter in the command sent to the RAID controller module. Please retry the operation. If this message persists, contact your Technical Support Representative.
I have a second, identical MD3420 (with different management IPs, obviously) where the gateway was set with no trouble.
The details are as follows:
OPERATING ENVIRONMENT DATA
Client system name: ifxprod1-p1.aemaine.com
Client OS: Linux
Application version: 11.20.0G06.0019
Storage array management version: 11.20.0G06.0019
Storage array name: ifxprod1_p1_MD3420
Firmware version: 08.20.12.60
Management class: devmgr.v1120api13.Manager
**************************************************
ERROR DATA
Command sent to RAID controller module in slot: 0
Host name: [redacted]
IP address: [redacted]
Return code: Error 4 - The operation cannot complete because of an incorrect parameter in the command sent to the RAID controller module. Please retry the operation. If this message persists, contact your Technical Support Representative.
Operation when error occurred: PROC_setControllerProperties
Timestamp: Jun 29, 2016 3:54:07 PM
STACK DATA
devmgr.v1120api13.sam.jal.ManagementOperationFailedException: Error 4 - The operation cannot complete because of an incorrect parameter in the command sent to the RAID controller module. Please retry the operation. If this message persists, contact your Technical Support Representative.
at devmgr.v1120api13.sam.jal.SYMbolClient.dispatchOperation(SYMbolClient.java:550)
at devmgr.v1120api13.sam.jal.StorageArrayFacade.issueCommand(StorageArrayFacade.java:10054)
at devmgr.v1120api13.sam.jal.StorageArrayFacade.sendCommandCommon(StorageArrayFacade.java:9610)
at devmgr.v1120api13.sam.jal.StorageArrayFacade.sendCommand(StorageArrayFacade.java:9507)
at devmgr.v1120api13.sam.jal.StorageArrayFacade.setControllerProperties(StorageArrayFacade.java:12920)
at devmgr.v1120api13.sam.configuration.interfaces.ChangeEthernetConfigDialog.changePortsConfiguration(ChangeEthernetConfigDialog.java:1001)
at devmgr.v1120api13.sam.configuration.interfaces.ChangeNetworkConfigDialog$2.performOp(ChangeNetworkConfigDialog.java:759)
at devmgr.v1120api13.shared.AbstractTaskAdapter.run(AbstractTaskAdapter.java:108)
THREAD DATA
Thread[Reference Handler,10,system]
Thread[Finalizer,8,system]
Thread[Signal Dispatcher,9,system]
Thread[Java2D Disposer,10,system]
Thread[AWT-XAWT,6,system]
Thread[AWT-Shutdown,5,system]
Thread[TimerQueue,5,system]
Thread[AWT-EventQueue-0,6,main]
Thread[DestroyJavaVM,5,main]
Thread[SwingWorker-pool-1-thread-1,5,main]
Thread[ChangeDetector,6,main]
Thread[PreferenceStoreChangeDetector,6,main]
Thread[LogMsgThread,6,main]
Thread[Np_Link_Monitor0,6,main]
Thread[DMVGarbageCollectorThread,6,main]
Thread[RecoveryProfile-13,6,main]
Thread[AEN-14,6,main]
Thread[RecoveryProfile-16,6,main]
Thread[AEN-17,6,main]
Thread[Timer-0,6,main]
Thread[Timer-1,6,main]
Thread[SwingWorker-pool-1-thread-2,5,main]
Thread[Thread-25,6,main]
Thread[SwingWorker-pool-1-thread-3,5,main]
Thread[Thread-33,6,main]