Clik here to view.
PowerEdge R530 PowerVault MD1200 (PERC H800)
Hi,we installed a PowerVault MD1200 (PERC H800) in PowerEdge R530. The controller is normally found but the error bellow is showed on startup. Is that any problem? How could we solve this...
View ArticlePowerVault Dell MD3260i
Dear,I'm purchasing new 4 TB Seagate for my MD3260i, is it nesserary to be Dell Certified?Here's the Disks specifications i'm buying:529FG 3.5" ST4000NM0023 4TB 7.2K Seagate6P85J 3.5" ST4000NM0063 4TB...
View ArticleClik here to view.
MD3220 - SAS Port Failed
Hello,We had a filed controller card on an MD3220, so we ordered a replacement. We received a new controller card from our Dell part rep and swapped it out. We can now see the card and it is showing as...
View ArticlePowerVault MD3600i - Virtual disk not on preferred path due to failover
MD3600i - dual controller, 2 10Gbps iSCSI ports per controller, jumbo frames enabled on switch and array2 MD1200's and 1 MD1220 both with dual EMM3 RAID 10 virtual disks2 RAID 6 virtual disksout of...
View ArticleClik here to view.
MD3260-Failed Diskpool
Hi guys.I've got a problem with diskpool. Today we lost 6 physical disk, then 2 Virtual disk got status=Failed.I tried a revive these disk and repair(restore) virtual disk,Diskpool, But to no...
View ArticleUnable to login to iSCSI bridge
DELL-Sam L,I've read previous posts on this forum from customers who have the iSCSI SAS Bridge for powervault TL2000/4000 and no longer have the password. I am in that situation as well. Previously you...
View ArticleTL-4000 woes
I have about a 4 year old TL-4000 and LTO6 Drive 3 is getting very problematic, wanting cleaning a lot and generating a significant amount of errors and failed jobs. So bad in fact I have disabled the...
View ArticleClik here to view.
Help moving drives to MD3220 w/SSD cache high perf tier 2012 R2 failover cluster
I have 3 Dell PowerEdge R820 servers running in duplex mode, directly attached to a Dell PowerVault MD3220 and MD1220 expansion enclosure. Each R820 has a Dell H200E SAS 6Gbps HBA dual port external...
View ArticleReset Password TL2000 iscsi bridge
Hi!I have a problem for remember password for TL2000 iscsci brige.I have a challenge key.
View ArticleMD1400
We are using MD1400 and 1420 enclosures to test hard drives. The reason was to take advantage of the 12G speed. It looks like only SAS drives will be recognized by these systems. It makes some sense...
View ArticleMD3220 and Md1220 - Questions about SSD Cache, High Performance Tier, and...
I am migrating to an MD3220 and MD1220 which has the SSD cache and high-performance tier feature keys installed and enabled. I have 6 x 200 GB SLC SSD SAS drives and 24 x 900GB SAS HDDs in the MD3220,...
View ArticlePowerVault TL2000 how to manage storage?
Hi,I never used powervault before, I'm just to use a powervault TL 2000 that has been sitting in my office for a while.There are bunch of tapes inside of it, I managed to power it and configure...
View ArticleDirect connection Dell MD3800i with Dell PowerEdge Server
I have two dell servers and one dell MD3800i. I want to leverage 10Gbps storage controller ports and I want to connect them directly (without SAN switch).Did anyone test it and if yes could please...
View ArticlePowerVault MD3000i - Multiple Virtual Disks under single RAID card
Hello all,I've recently inherited an old MD3000i powervault that has a couple issues which recently came up. I'm posting this question to the community first as it is the most vexing one for me.This...
View ArticlePOWERVAULT MD3000 INQUIRY
Serial Tag is<Service tag removed>for Power Vault MD3000 and is showing two hard drive failures in the array. Can I just order two hard new drives and if so, which kinds can I order for this?...
View ArticlePowerEdge R710 and PowerVault MD1000 Emm
I was sort of thrust into our office server setup. Boss has PowerEdge R710 Servers, and a PowerVault MD1000, and asked me to hook-up. But I read somewhere that MD1000 starts support with PowerEdge...
View ArticlePowerVault MD3260i -
Dear, I have MD3260i , I have lock mode and have message with error below : Code: 0E LFCondition: Controller lockdown with limited use of SYMbolso I can't open the configration and at the storage...
View ArticleDell Powervault TL2000 iSCSI Bridge - LAN Scan to find IP?
I have a Dell TL2000 with a F092G iSCSI Bridge that I just installed. The iSCSI bridge was purchased used and attempts to access the management web page at the default 10.10.10.10 address have failed...
View ArticleHow to subscribe new support ?
Hi everyone,My Dell infra is 5 years old... and 2 months. Support is over and troubles are coming (disks failed in PowerVault SAN...).Can i get some fresh support subscription ? Who should i contact ?...
View ArticleMD3200/1200 says Dell 5y05n Sandisk 800 GB SAS SSD is unsupported/incompatible
Help me Obi-Sam-Kenobi, you're my only hope!We have two brand new Dell branded/certified sas SSDs that show up happy and certified in our powerdge 730xds but when they go into the MD3200/MD1200 msdn is...
View Article