Hello,
I would like to seek some information regarding two events that were generated on a Dell MD3220i PowerVault RAID SAN drive.
Below are the four events that were received from the automatic email alerts:
1. Node ID: B260DVSAN1
Event Error Code: 7301
Event occurred: Jul 22, 2017 8:48:33 PM
Event Message: Battery insufficient capacity for backup after learn cycle
Event Priority: Warning
Component Type: Battery Pack
Component Location: Enclosure 0, RAID Controller Module 0, Slot 0
2. Node ID: B260DVSAN1
Event Error Code: 104
Event occurred: Jul 22, 2017 8:48:55 PM
Event Message: Needs attention condition resolved
Event Priority: Informational
Component Type: RAID Controller Module
Component Location: Enclosure 0, Slot 0
3. Node ID: B260DVSAN1
Event Error Code: 7301
Event occurred: Jul 22, 2017 9:51:44 PM
Event Message: Battery insufficient capacity for backup after learn cycle
Event Priority: Warning
Component Type: Battery Pack
Component Location: Enclosure 0, RAID Controller Module 1, Slot 0
4. Node ID: B260DVSAN1
Event Error Code: 104
Event occurred: Jul 22, 2017 9:52:05 PM
Event Message: Needs attention condition resolved
Event Priority: Informational
Component Type: RAID Controller Module
Component Location: Enclosure 0, Slot 0
The questions are:
1. Are these error messages/events indicate an imminent hardware failure?
2. What could have caused these events to occur?
3. Did the system do something on its own to clear/resolve the error?