I will in consloe to reset ....but i get this message
please can help me
-=<###>=-
Instantiating /ram as rawFs, device = 0x1
Formatting /ram for DOSFS
Instantiating /ram as rawFs, device = 0x1
Formatting...Retrieved old volume params with %38 confidence:
Volume Parameters: FAT type: FAT32, sectors per cluster 0
0 FAT copies, 0 clusters, 0 sectors per FAT
Sectors reserved 0, hidden 0, FAT sectors 0
Root dir entries 0, sysId (null) , serial number 10000
Label:" " ...
Disk with 1024 sectors of 512 bytes will be formatted with:
Volume Parameters: FAT type: FAT12, sectors per cluster 1
2 FAT copies, 1010 clusters, 3 sectors per FAT
Sectors reserved 1, hidden 0, FAT sectors 6
Root dir entries 112, sysId VXDOS12 , serial number 10000
Label:" " ...
Instantiating /ram as rawFs, device = 0x1
OK.
RTC Error: Real-time clock device is not working
Adding 13891 symbols for standalone.
Length: 0x13c Bytes
Version ver03.0A
Reset, Power-Up Diagnostics - Loop 1 of 1
3600 Processor DRAM
01 Data lines Passed
02 Address lines Passed
3300 NVSRAM
01 Data lines Passed
4410 Ethernet 82574 1
01 Register read Passed
02 Register address lines Passed
6D40 Bobcat
02 Flash Test Passed
3700 PLB SRAM
01 Data lines Passed
02 Address lines Passed
65D0 Host Channel 1--Tachyon QE8
01 TachLite Register Test Passed
65D1 Host Channel 2--Tachyon QE8
01 TachLite Register Test Passed
65D2 Host Channel 3--Tachyon QE8
01 TachLite Register Test Passed
65D3 Host Channel 4--Tachyon QE8
01 TachLite Register Test Passed
3900 Real-Time Clock
01 RT Clock Tick Passed
Diagnostic Manager exited normally.
Current date: 05/21/17 time: 19:50:18
Send <BREAK> for Service Interface or baud rate change
05/21/17-11:42:57 (tRAID): NOTE: Set Powerup State
05/21/17-11:42:58 (tRAID): SOD Sequence is Normal, 0 on controller A
05/21/17-11:42:58 (tRAID): NOTE: Turning on tray summary fault LED
05/21/17-11:42:58 (tRAID): NOTE: Installed Protocols: <MTPs: FC SAS USB > <ITPs: RDMA ISER IPOIB > <STPs: FCP RmtDMA iSCSI SAS >
05/21/17-11:42:58 (tRAID): NOTE: Required Protocols: <MTPs: FC SAS > <ITPs: UNK > <STPs: FCP SAS >
05/21/17-11:42:58 (tRAID): NOTE: loading flash file: Fibre
05/21/17-11:43:00 (tRAID): NOTE: DSM: Current revision 7
05/21/17-11:43:00 (tRAID): NOTE: SYMBOL: SYMbolAPI registered.
05/21/17-11:43:00 (tRAID): NOTE: RCBBitmapManager total RPA size = 1778384896
05/21/17-11:43:01 (tRAID): NOTE: init: ioc: 0, PLVersion: 11-075-20-00
05/21/17-11:43:01 (tRAID): WARN: MLM: Failed creating m_MelNvsramLock
05/21/17-11:43:01 (tRAID): WARN: MLM: Failed creating m_MelEventListLock
05/21/17-11:43:01 (tRAID): NOTE: CrushMemoryPoolMgr: platform and memory (CPU MemSize:2048), adjusted allocating size to 262144 for CStripes
05/21/17-11:43:03 (tRAID): SOD: Instantiation Phase Complete
05/21/17-11:43:02 (tRAID): WARN: sodLockdownCheck: sodSequence update: CtlrLockdown
05/21/17-11:43:02 (tRAID): WARN: No attempt made to open Inter-Controller Communication Channels 0-0
05/21/17-11:43:02 (tRAID): NOTE: LockMgr Role is Master
05/21/17-11:43:02 (IOSched): NOTE: SAS Expander Added: expDevHandle:x11 enclHandle:x2 numPhys:25 port:2 ioc:0 channel:0 numEntries:22
05/21/17-11:43:03 (tSasExpChk): NOTE: Local Expander Firmware Version: 00.00.80.10
05/21/17-11:43:10 (tSasDiscCom): NOTE: SAS: Initial Discovery Complete Time: 36 seconds since last power on/reset, 10 seconds since sas instantiated
05/21/17-11:43:10 (tRAID): NOTE: WWN baseName 0002c81f-66c60a49 (valid==>NoPrevAlt)
05/21/17-11:43:10 (tRAID): NOTE: spmEarlyData: No data available
05/21/17-11:43:11 (tRAID): SOD: Pre-Initialization Phase Complete
05/21/17-11:43:12 (utlTimer): NOTE: fcnChannelReport ==> ~2 ~3 -4 -5
05/21/17-11:43:17 (utlTimer): NOTE: fcnChannelReport ==> ~2 ~3 =4 =5
05/21/17-11:43:28 (tRAID): WARN: CmgrLockdownException: CORRUPT DBM DATABASE DETECTED - LOCKDOWN Type=6
05/21/17-11:43:28 (tRAID): NOTE: ACS: Acs Needed on Alt: No, StateCode: 6, ReasonCode = 12
05/21/17-11:43:28 (tRAID): NOTE: ACS: Icon ping to alternate failed: -2, resp: 0
AcsCommunicator::getInstance() Mode undetermined, using DOMI
05/21/17-11:43:28 (tRAID): WARN: ACS: altValidateStagedFirmware(): Domi Exception caught: IconSendInfeasibleException Error
05/21/17-11:43:29 (tRAID): SOD: Code Synchronization Initialization Phase Complete
05/21/17-11:43:28 (tRAID): WARN: Lockdown case-DB CORRUPT. NVPS did not update from Sstor.
05/21/17-11:43:29 (tRAID): SOD: Initialization Phase Complete
==============================================
Title: Disk Array Controller
Copyright 2008-2013 NetApp, Inc. All Rights Reserved.
Name: RC
Version: 07.84.53.60
Date: 11/14/2013
Time: 15:17:37 CST
Models: 2660
Manager: devmgr.v1084api04.Manager
==============================================
05/21/17-11:43:29 (tRAID): NOTE: SYMbol available
05/21/17-11:43:29 (tRAID): WARN: *********************************************************
05/21/17-11:43:29 (tRAID): WARN: *********************************************************
05/21/17-11:43:29 (tRAID): WARN: ** **
05/21/17-11:43:29 (tRAID): WARN: ** WARNING!!!!!! **
05/21/17-11:43:29 (tRAID): WARN: ** **
05/21/17-11:43:29 (tRAID): WARN: ** This controller is locked down due to detected **
05/21/17-11:43:29 (tRAID): WARN: ** corruption in the primary database. **
05/21/17-11:43:29 (tRAID): WARN: ** In order to prevent any configuration loss, the **
05/21/17-11:43:29 (tRAID): WARN: ** backed up database must be restored. **
05/21/17-11:43:29 (tRAID): WARN: ** **
05/21/17-11:43:29 (tRAID): WARN: ** **
05/21/17-11:43:29 (tRAID): WARN: *********************************************************
05/21/17-11:43:29 (tRAID): WARN: *********************************************************
05/21/17-11:43:29 (tRAID): SOD: sodComplete Notification Complete
05/21/17-11:43:30 (tRAID): sodMain CtlrLockdown sequence finished, elapsed time = 32 seconds
05/21/17-11:43:30 (tRAID): sodMain complete
05/21/17-11:43:29 (tRAID): WARN: SOD lockdown sequence complete - suspending...
Press within 5 seconds: <S> for Service Interface, <BREAK> for baud rate