Hi,
We have a MDI3000 that is connected to a power edge server with 4 nics.
Currently the SAN is connected with only one ISCSI connection (RAID controler module 0 port 0), becuase we have some read speed issue and the host server has a free nic, we think it would be a good idea to connect the second ISCSI from module 0 to the free nic of power edge server.
For doing so does these steps enough?
1. Give the RAID contorler Module 0, port 1 IP: 192.168.131.101
2. Give the free nic of the power edge server IP: 192.168.131.100
3. Connect the free ISCSI port of MDI3000 to the nic in the step 2.
4. During the connecting of the second ISCSI port to the host server no data intreaption will occur.
are these steps enough/correct?
our current configurartion:
After:
