Hi all.
I need help with the proper hardware configuration for using Dell's dense storage arrays. Want to put together four md3060e door to raise and couple that with a power edge server. I have heard multiple different configurations regarding the set up. I still haven't learned whether not I can do a hardware raid with so many discs. Can anyone shed light on what would be a good configuration as we were primarily using this as a file server for large media files. (10-30gb). I don't want to get into a discussion about which raid configuration as I would like to have the hardware set up completed first. I also don't want to configure this as one continuous Drive put in multiple volumes across the 240 de I don't want to get into a discussion about which raid configuration as I would like to have the hardware set up completed first. I also don't want to configure this as one continuous Drive put in multiple volumes across the 240 disks to avoid long rebuild times. Any help was greatly appreciate it with how to configure these arrays to daisychain with a PowerEdge server. I also wanted to know if these could be managed with other Dell servers on the same network using open manage. Thanks again for everyone's time