Hi,
I have had to replace both SAS 5/E cards in my R510 server and since then, I can see the existing array on the MD3000 attached to it but am unable to map to it in the OS - the iSCSI tab is missing in the MDSM and the error in the MDCU is "Storage Array model is not supported. Please make sure that the target storage array is an iSCSI-based Modular Disk Storage Array."
I have changed the HBA addresses in the MDSM but the fault is still there. I have upgraded the firmware and even tried swapping cards around and sourcing new cables in case they were contributing to the problem but I am still stuck with a very large virtual disk I cannot connect to.
All suggestions gratefully received!
Thanks - Steve